Tel: +86-371-65621392 | Email: info@haomei.biz

Concrete Plant Should Pay Attention To The Inspection Work

Writer:Admin   Time:17/03/20

     1. Check the concrete plant parts.During normal use of concrete plant to see the parts before every start of fixed and link, in part to the strong and reliable;The moving parts should be flexible.

     2. Check the concrete plant fuel quantity.Inside the fuel tank oil quantity should be enough, when you want to add after precipitation, filtration of fuel.
     
    3. Open the concrete plant oil.Open the valve in the line, unscrewed the fuel injection pump and kerosene filter vent screw (with a hand pump available manual oil pump), oil in air outside, and see whether oil leakage.
     
    4. Check the cooling water. When water is low, add clean soft water and check for leaks.
     
    5. Check the concrete plant oil. Pull out the dipstick check the oil storage. If the oil level is lower than the specified mark should be added; if the oil surface height exceeds the specified mark should identify the reasons for the increase in oil to be resolved.
     
    6. concrete plant artificial lubrication. To the need for artificial refueling parts to add enough oil.
     
    7. Clean the debris in the concrete plant. Look at the concrete plant around the machine and above, if there are tools or other debris, should be stored well.