Tel: +86-371-65621392 | Email: daisy@concretebatchplant24.com

How To Use The Mixer Trucks radiator?

Writer:Admin   Time:15/04/27

     

     

    1,Radiator of concrete mixer truck should not contact with any acid, alkali or other corrosive properties.
     
    2,Recommend the use of hard and soft water softening treatment to use, avoid to cause the radiator internal blockage and scale production.
     
    3,In the use of antifreeze, in order to avoid corrosion of the radiator, please be sure to use normal manufacturer production and meet the national standards of long-acting antirust antifreeze.
     
    4,In the process of installation radiator, please don't damage the scattered tropical and bruising radiator (film), to ensure the cooling capacity and seal.
     
    5, completely drain water inside the radiator again, the first engine block drain switch will turn on, when there is flowing out, and then shut to avoid blisters.
     
    6 in daily about concrete truck mixers use should always check the water level and add water to be shut down after cooling. When water is added to the tank lid slowly opened, workers should be kept away from the body plus the outlet, to prevent high-pressure steam spray nozzle oil plus cause burns.
     
    7 in winter causing core rupture phenomena, such as long-term parking or indirectly, in order to prevent icing parking, should the radiator cap and drain switch, all the water release.
     
    8, spare radiator effective environment should be kept ventilated and dry.
     
    9, as the case the user should be between 1 to 3 months, a complete cleaning of the radiator core. When cleaning with water into the wind in the opposite side of the water.
     
    10. For many batching plant manufacturers the water level should be cleaned once every three months, or as the case, remove the parts with non-corrosive detergent and warm water.